AVMATRIX Shark H4M handleiding
Handleiding
Je bekijkt pagina 11 van 49
SHARK H4M
四通道音视频切换台
7
10
Power & Audio
11
USK & DSK
12
PIP/ LOGO
13
MV & Transition effect & Stream&REC
14
MENU
15
CUT/ AUTO
16
T-Bar
17
SPEED
18
MUTE/ FTB
4.2.
Front Control Panel
1.Gain control&Low cut filter
Gain control：Adjust the preamplifier gain. When inputting normal voice or
music, adjust it until the signal reaches -10dbu when the SIG indicator
light flashes slightly, which is the best state.
Low cut filter：Significantly cuts signals below 60Hz.
2.2-band tones for the audio input channels
High-quality, sensitive 2-band equalizer adjusts the overall tone of the
channel. The bass and treble equalizer adjusts the wave forms in a broom
shape, affecting sounds above 12KHz and below 80Hz, respectively, and
adjusting the decibels above -15 and below +15.
3.Effect send volume knob & switch button
Effect send volume knob： Adjusts the volume of this channel sent to the
digital effects processor.
switch button：Press this button to enter the mono mode, and the signals
of the two adjacent MIC channels are sent to the L/R main mix evenly. Pop
up this button to enter the stereo mode, and the signal of the left channel
is mixed to the left channel of the main mix, and the signal of the right
channel is mixed to the right channel of the main mix.
Bekijk gratis de handleiding van AVMATRIX Shark H4M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AVMATRIX |
| Model | Shark H4M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17600 MB |
