AVMATRIX K2-N handleiding
Handleiding
Je bekijkt pagina 13 van 31
11
4. Menu Settings
4.1 Operation Screen
1. Connection Status: Display the information of the currently connected camera, including camera
group, serial number, camera name, control protocol, protocol-related information (IP port, connected
control interface, etc.), camera IP address, and TALLY signal status. (tally turns red when the
controller receives PGM signal, and tally turns green when it receives PVW signal).
2. Camera parameters: Real-time display camera red gain, blue gain, aperture, shutter, gain image
parameters.
3. Camera speed: Real-time display camera pan-tilt speed, zoom speed and focus speed.
4. Status bar: Real-time display the controller's operation status.
5. Knob and Shortcut Key Function: Display the knob and shortcut key function, it’s can customize
the shortcut key function in Custom-Fn/Key menu.
6. Touch Control Area: Touch the screen to adjust the menu.
4.2 System setting
4.2.1 Network Setup
Controller identifies the IP camera by its IP address, so when connecting the camera and the controller
via LAN cable, you need to set the IP, subnet mask and gateway of the controller first. And make sure
the camera and the camera controller are in the same local area network.
If you connect the camera and controller via RS422/232/485, you can ignore this network configuration
step and directly enter the "Manage - Add" menu to add the camera.
Bekijk gratis de handleiding van AVMATRIX K2-N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AVMATRIX |
| Model | K2-N |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 7476 MB |
