Avenview HDM2-SPLITPRO-T4K-V3 handleiding

Niet gecategoriseerd

Avenview

24 pagina's

PDF beschikbaar

Handleiding

Page |

www.avenview.com

Control through RS-232 port / Ethernet port

1. Please note when power cycling device, please restart unit at least 5 to 15 seconds after to allow the power

capacitors to discharge.

2. The HDM2-SPLITPRO-T4K-V3 PC control software operates with Microsoft Windows 7, 8, 10, 11 through the

interface of Ethernet or RS-232 serial control.

3. Through software and COM port you can assign an IP address before connecting via RJ45.

Please NOTE: (Under Microsoft Windows 7, please run software as administrator).

Once the software is installed click on the ICON, the following dialog will pop-up. First time connection, please

connect via RS232 serial cable.

RS-232 serial Mode: Use RS-232 to connect the port on device and computer. Select the correct COM port and click

the OK button.

Ethernet Mode: Enter the IP address of the device and click the OK button and power cycle the unit.

The default IP: 192.168.1.46

Bekijk gratis de handleiding van Avenview HDM2-SPLITPRO-T4K-V3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.