Avantco 177VB204 handleiding
Handleiding
Je bekijkt pagina 9 van 16
User Manual
www.AvantcoEquipment.com 9
1. Press the knob and rotate counter-clockwise to mark and light the burner with a long cigarette lighter.
2. Hold the knob for 20 seconds and then release it.
3. Repeat it if the burner is not lit.
NOTE: When the unit is lit for the first time, it might take a longer time due to the cold air in the pipe. If the flame
does not light the first time, turn the burner o and wait 5 minutes, then repeat. See troubleshoot section if the
problem persists.
• To turn o the burner, rotate the knob clockwise to "OFF" mark on the control panel.
• For complete shutdown, ensure that all burner knobs are turned to the o position, and then turn main
gas supply o.
• This unit features a rail mechanism that allows the distance between the spit assembly (and meat) and the
burners to be adjusted when necessary.
1. Pull the knob towards you to bring the burners closer to the spit assembly.
2. Push the knob away to move the burners further away from the spit assembly.
CAUTION: Make sure the back bracket clips are removed before attempting.
WARNING: Be careful when adjusting the burners. Make sure the machine and gas supply are secure. A flex
hose is needed to operate this feature.
Operation
Lighting & Relighting
Shutdown
Burner Adjustment
Bekijk gratis de handleiding van Avantco 177VB204, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Avantco |
| Model | 177VB204 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2064 MB |
