Audiotec Fischer AMI handleiding
Handleiding
Je bekijkt pagina 29 van 34
29
en
5.3 Electrical signal measurements of factory speaker signals using the
Advanced Input Signal Analyzers (AISA)
The AMI allows you to measure the output signal of an OEM amplier in combination with the Advanced Input Signal
Analyzer (AISA) in the DSP PC-Tool. To do this, the signal from the OEM amplier must be connected to the terminals
of the enclosed RCA to highlevel adapter.
The speaker outputs of the OEM amplier must be connected to the included RCA-to-highlevel adapter, which is then
plugged into the Line input (R) of the AMI (page 21, point 7). The Line input (R) voltage switch (page 21, point 6) must
be set to 40 V. Then, connect the AMI to your PC using the provided USB-C cable.
Note: When using DSP PC-Tool 5, ensure that the right Line Input of the AMI is selected in the AISA settings before
starting the measurement.
To do this, navigate to the IO tab, open the Advanced Input Signal Analyzer by clicking on the icon, and then click
the icon.
PC
3 m USB-C to USB-C
cable with USB-A adaptor
USB-C
USB-C
USB-A
or
OEM amplier
RCA-to-Highlevel
adaptor
Speaker wire
1
2
4
3
5
Schalter:
40V
Bekijk gratis de handleiding van Audiotec Fischer AMI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Audiotec Fischer |
| Model | AMI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7035 MB |
