Audient EVO SP8 handleiding
Handleiding
Je bekijkt pagina 9 van 27
HARDWARE HARDWARE
To quickly mute a channel, hold down the channels input button until
the Mute screen is shown, and the channel button begins ashing. When
a channel is muted, the gain level is replaced with the Mute icon, this will
remain in place until mute is deactivated, by again holding down the
channel button.
To activate phantom power, select the channel, then press the 48V Button,
which will then illuminate red and activate a temporary feature toggle
screen. This is set independently per channel so if you navigate away to a
dierent channel, where phantom power isn’t activated, the 48V Button will
no longer be illuminated. To turn o 48V, press the 48V Button again, which
will again display the feature toggle screen.
Both channels 1 + 2 are able to switch to Instrument Mode, meaning they
are able to be used to record guitars and basses. To do this, select either
channel 1 or 2, then press the Instrument Button. The button will then
illuminate as well as display the temporary feature toggle screen. To turn
o Instrument Mode, press the Instrument Button again, which will again
display the feature toggle screen.
If you try and activate phantom power on Channels 1+2 whilst the instrument
input is active, an error screen will be shown as it is not possible to have both
active at once.
Remember: After you’ve nished recording via the Instrument
Inputs, you’ll need to switch them back to line & microphone
level inputs. To do this, press whichever instrument channel
button you’re using, then press the Instrument Button.
Bekijk gratis de handleiding van Audient EVO SP8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Audient |
| Model | EVO SP8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8919 MB |