Audibax M88 DSP Dante handleiding
Handleiding
Je bekijkt pagina 17 van 106
No matter the starting time or the release time, it just helps to reduce the changing
speed of gain attenuation. That is to say, the speed of the gain from -40dB to 0dB is
slowed down due to the influence of starting time. The starting time or release time is
unrelated to the threshold. If the signal changes below the threshold, the starting time
and the release time will have their own respective influence on gain attenuation; when
the signal level rises above the threshold, the gain attenuation produced by the expander
will disappear in accordance with the speed controlled by the starting time. When the
gain attenuation is reduced to 0dB, the expander will stop expansion. Later, when the
signal reduces to below the threshold, the expander will start again and the release time
will begin to work.
Compressor & Limiter
Compressor
The compressor is used to reduce the dynamic range of the signal higher than the
threshold set by the users, and to maintain the dynamic range of the signal lower than
the threshold. The compressor has the following control parameters:
- Threshold: When the signal level is higher than the threshold, the compressor/limiter
begins to reduce the gain. Any signal that exceeds the threshold is regarded as overshoot
signal, and its level will be reduced in normal cases. To a greater extent the signal exceeds
the threshold, more level is attenuated.
-Ratio: It refers to the compression ratio. The ratio decides the attenuation degree of the
overshoot signal to the threshold level. The smaller the compression ratio is, more easily
the signal will be higher than the threshold. Once the signal exceeds the threshold, the
compression ratio decides the ratio of input signal variation to output signal variation. For
example, when the compression ratio is 1:2, if the input signal is 2dB higher than the
threshold, the exceeding part only changes by 1dB. A compression ratio of 1:1 suggests
that the compressor does not attenuate the signal in proportion. The adjustable range of
compression ratio is 1-20.
M88 DSP / M88 DSP Dante
www.audibax.com 15
Bekijk gratis de handleiding van Audibax M88 DSP Dante, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Audibax |
| Model | M88 DSP Dante |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13294 MB |
