Atoll PR300 EVO handleiding
Handleiding
Je bekijkt pagina 2 van 4
ATOLL ELECTRONIQUE
OWNER’S MANUAL ~ PREAMP
PR300 EVO
ATOLL ELECTRONIQUEPage 3Page 6
CAUTIONS
• Do not make any connections when your device is powered on.
• Install your appliance in a dry, well ventilated place away from any
source of heat.
• Do not put something on your preamplifier.
• Do not make any plug in when the preamplifier is on.
• Strictly respect polarity the left and right connections.
• Avoid any short-cut.
ADVISES
• Your device will provide you with optimal listening quality
approximately half an hour after switching it on, the time it takes for
the power stages to reach their ideal operating temperature. Between
two uses, it is therefore preferable to use the rest position so that the
power stages remain at their optimal temperature. At night or when
you leave your home, it is preferable to use the main switch to turn
off the device.
• We recommend you to choose good quality connection cables (to
other devices as well as to speakers). Do not hesitate to seek advice
from your specialist dealer.
BLUETOOTH®
Your appliance allows the reception of audio signals sent since any devices having
a Bluetooth transmitter (Smartphone, tab, computer…).
First time association:
• Activate the Bluetooth connectivity of your emitter device.
• Select the Bluetooth (BT) input of PR300: unlock symbol
BT
appears.
• Select your appliance on the list of possible receiver (named PR300).
• Once the connection is made, the lock symbol
BT
appears.
The whole audio signals of your device source will then be transmitted towards
your PR300. Your emitter device will remain associated until you unlock the PR300
with your Smartphone or switch off your amplifier.
Association of another emitter: Once associated to an emitter, you’ll need to
switch completely your PR300 off in order to make it visible from another emitter.
The quality of reception of the signal depends on the power of the Bluetooth
emitter and the distance between the 2 devices.
For better reception, avoid being more than 5 meters of your device for a correct
reception without any risks of signal cuts.
Your appliance is equipped with a High-Res. asynchronous USB Input (B type). It will
be possible to use it only when you’ll have downloaded the appropriate driver on
your computer. This driver can be freely downloaded on our website at the page:
• Accepted format on optical and coaxial Inputs: 16-24 bits (44,1 kHz, 48 kHz,
88,2 kHz, 96 kHz, 176,4 kHz and 192 kHz).
• Accepted format on USB Input:
– DSD: DSD64, DSD128 and DSD256.
– PCM: 16-32 bits (44,1 kHz, 48 kHz, 88,2 kHz, 96 kHz, 176,4 kHz,
192 kHz, 352,8 kHz, 384 kHz).
You will find attached an explanatory note on its installation.
This driver is not required for Macintosh computers.
In order to avoid problems with high quality format transfers
(24 bits/192 kHz), it is recommended to use a USB
connection cable with ferrite.
USB INPUT
ACCEPTED FORMATS
https://www.atoll-electronique.com/en/xmos-specific-driver-usb/
Bekijk gratis de handleiding van Atoll PR300 EVO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atoll |
| Model | PR300 EVO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 867 MB |
