Atlona AT-UHD-PRO3-44M handleiding
Handleiding
Je bekijkt pagina 26 van 75
AT-UHD-PRO3-44M
26
1. Login to the web GUI. Refer to Introduction to the Web GUI (page 53) for more information.
2. Click I/O, under the Conguration section, in the menu bar on the left side of the screen.
3. Click the drop-down list, across from Out 3: Output_3, and select In 1 : Input_1. This step routes the source
that is connected to HDMI IN 1 to ZONE OUT 3.
4. Click the Mirror Mode drop-down list and select On (if not already selected). On is the default setting.
5. Click the drop-down list, across from Out 5: Output_5, and select Out 3 : Output_3. This instructs the matrix to
mirror the source signal on ZONE OUT 3 to ZONE OUT 5.
6. Click the Save button to commit changes.
Basic Operation
Mirroring On
NOTE: Name descriptors in the web GUI are dierent than those of the port names on the enclosure
(e.g. Out 5: Output_5 = ZONE OUT 5), and are used interchangably in this document. Therefore,
it is recommended to refer to ports by the their number, until they are changed. Refer to Input and
Output Management (page 33) for more information on this topic.
ZONE OUT 3 mirrored to ZONE OUT 5
HDMI IN 1 routed to ZONE OUT 3
Bekijk gratis de handleiding van Atlona AT-UHD-PRO3-44M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-UHD-PRO3-44M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10442 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 3630 g |
| Breedte | 439.74 mm |
| Diepte | 254 mm |
| Hoogte | 55.22 mm |
