Atlona AT-UHD-HDVS-300-KIT handleiding
Handleiding
Je bekijkt pagina 37 van 50
AT-UHD-HDVS-300-KIT
37
The Web GUI
Input / Compliance
The Input column lists all available inputs, including HDMI IN 5 on the receiver. Click the drop-down list for the
desired input, under the Compliance column, to select the HDCP setting. Note that the HDCP compliance cannot
be set for the VGA input, as this interface cannot accept HDCP content.
• Compliant - Reports to the source device that the display (sink) is an HDCP-compliant device. The source will
send HDCP content to the display (sink) device.
• Not Compliant - Reports to the source device that the display (sink) is an non-HDCP-compliant device.
The source will not send HDCP content.
• Auto - Automatically detects the presence of HDCP-compliant sink devices. If an HDCP-compliant display is
detected, then HDCP content will be sent. Otherwise, no HDCP content is sent.
Click the Save button to conrm the EDID selection. Click the Cancel button to abort the changes.
Save Output EDID to
Saves the EDID of the display, connected to HDMI Out port on the receiver, to the specied memory location.
Click the drop-down list to select the desired memory location (Memory 1 - Memory 4). Click the Save button to
conrm the operation.
NOTE: The HDCP control feature does not provide decryption of HDCP content to non-compliant sink
devices.
Bekijk gratis de handleiding van Atlona AT-UHD-HDVS-300-KIT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-UHD-HDVS-300-KIT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6185 MB |
