Atlona AT-UHD-HDVS-300-KIT handleiding
Handleiding
Je bekijkt pagina 33 van 50
AT-UHD-HDVS-300-KIT
33
Network page
The Web GUI
DHCP
Click the ON button to enable DHCP. Click the OFF
button to enable static IP mode. In static IP mode, the IP
Address, Subnet, and Gateway elds can be modied.
IP Address
Enter the IP address of the AT-UHD-HDVS-300-TX in this
eld. This eld can only be changed when DHCP is set
to OFF.
Subnet
Enter the subnet mask in this eld. This eld can only be
changed when DHCP is set to OFF.
Gateway
Enter the gateway (router) IP address in this eld. This
eld can only be changed when DHCP is set to OFF.
Telnet Port
Enter the Telnet listening port in this eld. The default
port is 23.
HTTP
Enter the HTTP listening port in this eld. The default
port is 80.
IP Timeout
Enter the time-out interval, in seconds, in this eld.
This eld represents the time interval before the TCP/IP
connection times out.
Hostname
Enter the desired hostname in this eld. By default, the
hostname is the product (SKU) plus the last ve digits of
the unit serial number.
Telnet Login Mode
Click the ON button to prompt for username and
password credentials. Username and password
credentials are the same as the web GUI login
credentials. Click the OFF button to prevent Telnet
sessions from being opened.
Save / Cancel
Click the Save button after any changes have been
made. Click the Cancel to abort changes.
After pressing the Save button, a reboot message will appear at the top of the web GUI. The AT-UHD-HDVS-300-TX
must be rebooted when any network setting is changed.
Bekijk gratis de handleiding van Atlona AT-UHD-HDVS-300-KIT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-UHD-HDVS-300-KIT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6185 MB |
