Atlona AT-UHD-CLSO-840 handleiding
Handleiding
Je bekijkt pagina 46 van 76
AT-UHD-CLSO-840
46
Value Description
Compliant Instructs the source to send HDCP content.
Not Compliant Instructs the source to send non-HDCP content (if possible) to a non-
HDCP display and/or sink device.
Auto Allows the input to automatically select the mode, based on the
compatibilities of the display/sink device.
Some devices will automatically transmit HDCP content if an HDCP-compliant display/sink is detected. The AT-
UHD-CLSO-840 provides a method for controlling this behavior. Note that setting this value to Not Compliant will
not decrypt or strip HDCP content from a protected signal.
HDCP Management
Basic Operation
1. Login to the web GUI. Refer to Introduction to the Web GUI (page 55) for more information.
2. Click HDCP, under the Conguration section in the menu bar on the left side of the screen.
3. Click the Compliance drop-down list for the input, and select the desired setting.
4. Click the Save button to commit changes. Click Cancel to abort changes. To reset HDCP compliance setting to
factory-defaults, click the HDCP Reset button near the top of the page.
NOTE: Setting an input to this value does not decrypt or
“strip” HDCP content from a protected signal.
Bekijk gratis de handleiding van Atlona AT-UHD-CLSO-840, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-UHD-CLSO-840 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11442 MB |
