Atlona AT-UHD-CLSO-840 handleiding
Handleiding
Je bekijkt pagina 11 van 76
AT-UHD-CLSO-840
11
HDMI IN HDBaseT IN
R L
1
R L
2
76 8
21 3 4
4321 5
R L
3
R L
4
R L
1
R L
2
R L
3
R L
4
HDBaseT OUT LAN
ON
OFF
PWR 100-240VAC 50/60Hz
RS-232
HDMI OUT
AUDIO IN AUDIO OUT
+ +
+ +
+ ++ + + +
+ +
+ +
+ +
RX TX
AT-UHD-CLSO-840
FCN CANCEL EDID
INFO
POWER ENTER 5 6 7 8
1 2 3 4
3 5 61
2 4 7 10
8 9
Rear
1 HDMI IN
Connect up to ve 4K UHD source devices to these ports using HDMI cables.
2 AUDIO IN
Connect up to four analog audio sources to these ports using the included 5-pin captive screw blocks. Refer to
Audio Connectors (page 12) for wiring information. These analog audio ports provide the option of replacing
the HDMI source audio, and embedding analog audio on the outputs.
3 HDBaseT IN
Connect up to three PoE-compatible transmitters, such as the AT-UHD-EX-100CE-TX, to these ports using
Ethernet cable.
4 AUDIO OUT
Connect these ports to the analog inputs of a DSP, audio amplier, or other output device, using the included
5-pin captive screw blocks. Refer to Audio Connectors (page 12) for wiring information.
5 HDMI OUT
Connect up to two local displays to these ports using HDMI cables.
6 HDBaseT OUT
Connect up to two PoE-compatible receivers to these ports using Ethernet cable.
7 ON/OFF
Press this button to power-on or power-o the matrix.
8 LAN
Connect an Ethernet cable from this port to the Local Area Network (LAN).
9 RS-232
Connect an RS-232 control device to this port using the included 3-pin captive screw block.
10 PWR 100-240VAC 50/60Hz
Connect the included power cable from this receptacle to an available AC power outlet.
Panel Description
Bekijk gratis de handleiding van Atlona AT-UHD-CLSO-840, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-UHD-CLSO-840 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11442 MB |
