Atlona AT-UHD-CAT-2 handleiding
Handleiding
Je bekijkt pagina 16 van 45
AT-UHD-CAT-2
16
Device Operation
Selecting EDID Presets
The AT-UHD-CAT-2 comes with a default EDID plus 16 pre-programmed EDID selections. When selecting the default
or one of the pre-programmed EDID selections, the EDID mode must be set to INT (internal) mode.
Available EDID selections are presented in the table below.
EDID
STD ATL 1280x800 RGB 2CH
ATL 1080P 2CH ATL 1366x768 RGB 2CH
ATL 1080P Multi CH ATL 1080P DVI
ATL 1080P DD ATL 1280x800 RGB DVI
ATL 1080P 3D 2CH ATL 3840x2160@30 2CH
ATL 1080P 3D Multi CH ATL 3840x2160@30 Multi CH
ATL 1080P 3D DD ATL 3840x2160@60 2CH
ATL 720P 2CH ATL 3840x2160@60 Multi CH
ATL 720P DD
1. Login to the web server. Refer to Introduction to the Web Server (page 29) for more information.
2. Click EDID in the menu bar.
3. Make sure the EDID lock toggle switch is set to UNLOCK.
4. Click the EDID mode drop-down list and select INT.
5. Select the desired EDID from the INT EDID settings drop-down list. The selected EDID will be used by the
source, before sending A/V data to the display (sink) device.
NOTE: If the resolution and timing limitations of both displays, connected to the HDBaseT
OUT port, are unknown, then select the STD EDID for the best compatibility. The STD EDID will
automatically build an EDID based on the capabilities of both displays. When selecting an EDID,
make sure both connected displays can support the resolution and timing information. Otherwise,
loss of picture and/or audio may result.
Bekijk gratis de handleiding van Atlona AT-UHD-CAT-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-UHD-CAT-2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5847 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 1660 g |
| Breedte | 44 mm |
| Diepte | 254 mm |
| Hoogte | 219.5 mm |
