Atlona AT-OMNI-311 handleiding

23 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 11 van 23
AT-OMNI-311
11
Pairing
Basic Operation
Manual Pairing
The OmniStream 311 and OmniStream 324 can also be paired manually. This applies when the OmniStream 311
and OmniStream 324 are connected, either through a network switch (on the same broadcast domain) or directly to
one another using category cable. This instructions below cover manual pairing for both the OmniStream 311 and
OmniStream 324.
1. Make sure both the OmniStream 311 and OmniStream 324 are connected, either directly or through a network
switch, and that all USB connections have been made.
OmniStream 311
OmniStream 324
2. Press and hold the PAIRING button, for no more than 10 seconds, on the OmniStream 311 using the end of a
paperclip or other pointed object.
3. Release the PAIRING button. The LINK LED indicator will begin ashing. Pairing mode is now active on the
OmniStream 311.
4. Press and hold the PAIRING button on the OmniStream 324, for no more than 10 seconds, using the end of a
paperclip or other pointed object.
PWR
LINK
SIGNAL
HOST
OMNISTREAM
TM
UTILITY PAIRING LANHOST
AT-OMNI-311
PAIRING button
HOST
LINK
PWR
O
MNI
S
TREAM
TM
SIGNAL
USB
USB
USB
USB
LAN
PAIRING
UTILITY
AT-OMNI-324
DC 24V
IMPORTANT: Pressing the PAIRING button for more than 10 seconds will cancel the pairing mode.
IMPORTANT: Pressing the PAIRING button for more than 10 seconds will cancel the pairing mode.
The PAIRING button on the OmniStream 324 must be pressed within 10 minutes of activating
pairing mode on the OmniStream 311. If not, then the pairing process will automatically be
cancelled.
5. Release the PAIRING button. The LINK LED indicator will begin ashing. Pairing mode is now active on the
OmniStream 324.
The OmniStream 311 and OmniStream 324 will begin the linking process. During the linking process, the LINK
LED indicator on both unit may ash more slowly. This is normal behavior.
Once both LINK LED indicators are solid green, the pairing process will be complete.
NOTE: To cancel pairing mode, press and hold the PAIRING button for more than 10 seconds.

Bekijk gratis de handleiding van Atlona AT-OMNI-311, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAtlona
ModelAT-OMNI-311
CategorieNiet gecategoriseerd
TaalNederlands
Grootte2849 MB

Caratteristiche Prodotto

Kleur van het productZwart
Gewicht230 g
Breedte99.5 mm
Diepte75.45 mm
Hoogte26.4 mm