Atlona AT-OMNI-311 handleiding
Handleiding
Je bekijkt pagina 10 van 23
AT-OMNI-311
10
The PWR, LINK, HOST, and SIGNAL LED indicators on the OmniStream 311 provide basic information on the
current status of the unit.
LED Indicators
Basic Operation
LED Description
PWR Solid green Unit is powered.
Off Unit is not powered.
• Verify that a USB Type-B cable is connected from the HOST port to
the host computer.
LINK Solid green The link integrity between the transmitter and the receiver is good.
Blinking green
(slow)
The transmitter is attempting to establish a link to the receiver.
Blinking green
(fast)
The transmitter is in Pairing Mode.
Off There is no link between the transmitter and the receiver.
• Direct Mode:
Verify that an Ethernet cable is connected between the LAN port on
the transmitter and the receiver.
• Network Mode:
Verify that an Ethernet cable is connected between the LAN port on
the transmitter and the network switch.
• Check that the Ethernet cable is not physically damaged.
• Make sure that the Ethernet cable does not exceed 330 feet (100
meters).
HOST Solid green The transmitter is properly enumerated on the host computer.
Blinking green The transmitter is in a suspended state.
SIGNAL Blinking green This LED indicator will blink intermittently when data is being transmitted
between the transmitter and the receiver.
Off The transmitter is in Suspend Mode.
Bekijk gratis de handleiding van Atlona AT-OMNI-311, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-OMNI-311 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2849 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 230 g |
| Breedte | 99.5 mm |
| Diepte | 75.45 mm |
| Hoogte | 26.4 mm |
