Atlona AT-OMNI-122 handleiding
Handleiding
Je bekijkt pagina 35 van 129
AT-OMNI-121 / AT-OMNI-122
35
Basic Conguration Tutorial
Conguring the HDMI Output Stream
1
2
3
4
5
1. Click HDMI Output in the menu bar.
2. The Descrambling > Enable toggle switch is enabled by default. When enabled, this toggle will be orange.
For this example, leave the setting enabled.
3. The Descrambling > Key eld is set to scrambling by default. This is the same key that is being used under
the Scrambling > Key eld on the encoder, and will allow the decoder to descramble the signal and send it out
over the HDMI output to the display. Leave this key at it’s default setting.
4. Click the HDCP > Version drop-down list and select the HDCP version. 2.2 will work with most sources.
However, in this example, an older sink/monitor which doesn’t support HDCP 2.2 is being used. Therefore, the
value is set to 1.4.
5. Click the Video > Input drop-down list and select the video source. Based on what has been congured, the
following options are available:
Video > Input
ip_input1 (226.0.0.1:1000)
ip_input2 (226.0.0.2:1000)
ip_input3 (226.0.10.1:1100)
ip_input4 (226.0.10.2:1100)
Since this is the Video eld, a video source should be selected. Referring to Table 2.3, on the previous page,
ip_input1 (226.0.0.1:1000) and ip_input2 (226.0.0.2:1000) are video data, from two dierent
encoders. For this example, this eld will be set to ip_input1 (226.0.0.1:1000).
Bekijk gratis de handleiding van Atlona AT-OMNI-122, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-OMNI-122 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18571 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 700 g |
| Breedte | 208 mm |
| Diepte | 112 mm |
| Hoogte | 34 mm |
