Atlona AT-OMNI-122 handleiding
Handleiding
Je bekijkt pagina 33 van 129
AT-OMNI-121 / AT-OMNI-122
33
Basic Conguration Tutorial
Subscribing to an Encoder
The next step is to congure the decoder so that it is able to receive video, audio, and/or data (control) streams from
the encoder. This process is referred to as “subscribing to the encoder”.
1. Go to the decoder and click IP Input in the menu bar.
2. Locate the Input 1 window group and verify that the Enable toggle switch is enabled. When enabled, the toggle
switch will be orange. Perform the same procedure for the Input 2 window group.
3. Under the Input 1 window group, enter 226.0.0.1 in the Multicast address eld. Under the Input 2 window
group, enter 226.0.0.2 in this eld. These multicast IP address are the same addresses that were specied
under the Video > Destination IP address eld for the encoders.
4. In the Port eld, enter 1000 under both Input 1 and Input 2 window groups. These are the same port settings
that were entered under the Video > UDP Port section of the encoder.
5. Click the SAVE button, under the Input 1 and Input 2 window groups, to commit changes.
1
2
3
4
5
Video Conguration
Bekijk gratis de handleiding van Atlona AT-OMNI-122, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-OMNI-122 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18571 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 700 g |
| Breedte | 208 mm |
| Diepte | 112 mm |
| Hoogte | 34 mm |
