Atlona AT-OMNI-111 handleiding
Handleiding
Je bekijkt pagina 22 van 153
Using OmniStream
™
with Velocity
™
Device Manager
22
Subscribing to an Encoder
The next step is to congure the decoder so that it is able to receive video, audio, and/or data (control) streams from
the encoder. This process is referred to as “subscribing to the encoder”.
1. Go to the decoder, click IP INPUT in the menu bar, and locate the IP Input 1 window group. Verify that the
Enable toggle switch is enabled. When enabled, the toggle switch will be green. Perform the same procedure
for the IP Input 2 window group.
2. Under the IP Input 1 window group, enter 226.0.0.1 in the Multicast Address eld. Under the IP Input 2
window group, enter 226.0.0.2 in this eld. These multicast IP address are the same addresses that were
specied under the Video > Destination Multicast/Unicast Address eld for the encoders.
3. In the Port eld, enter 1000 under both IP Input 1 and IP Input 2 window groups. These are the same port
settings that were entered under the Video > Destination UDP Port eld of the encoder.
4. Click the SAVE button, under the IP Input 1 and IP Input 2 window groups, to commit changes.
Basic Conguration Tutorial
Video Conguration
1
2
3
4
Bekijk gratis de handleiding van Atlona AT-OMNI-111, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-OMNI-111 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 21597 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Breedte | 208 mm |
| Diepte | 112 mm |
| Hoogte | 34 mm |
| LED-indicatoren | Ja |
