Atlona AT-OMNI-111 handleiding
Handleiding
Je bekijkt pagina 14 van 153
Using OmniStream
™
with Velocity
™
Device Manager
14
Getting Started
7. Click the desired OmniStream device from the Unassigned list.
8. The control interface for the device will be displayed and the device can be congured as desired.
The illustration below shows the DEVICE INFO screen for an AT-OMNI-112 encoder.
If a DHCP server is not found within 60 seconds, the encoder will be placed in Auto IP (APIPA) mode and
assigned an IP address within the range of 169.254.xxx.xxx/16. If this occurs, congure the network
interface of the computer that is running Velocity, located on the same subnet (169.254.xxx.xxx, subnet mask
255.255.0.0). Refer to Conguring a Static IP Address (page 89) for more information on conguring an
encoder in Auto IP mode.
If no OmniStream encoders are found, then verify the following:
• The computer that is running Velocity must be on the same network as the OmniStream device.
• Remove any network restrictions that may be in place. In order for mDNS to function properly, there
must not be any restrictions applied to the network.
Bekijk gratis de handleiding van Atlona AT-OMNI-111, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-OMNI-111 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 21597 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Breedte | 208 mm |
| Diepte | 112 mm |
| Hoogte | 34 mm |
| LED-indicatoren | Ja |
