Atlona AT-OMNI-111 handleiding
Handleiding
Je bekijkt pagina 12 van 153
Using OmniStream
™
with Velocity
™
Device Manager
12
Accessing OmniStream Devices
The Velocity Device Manager uses multicast Domain Name Server (mDNS) to automatically discover each encoder
on the network.
By default, the OmniStream devices are set to DHCP mode, allowing a DHCP server (if present) to assign the
encoder an IP address. Once an IP address has been assigned, Velocity can be used to manage the product on the
network. Note that Velocity will only be able to discover encoders if they are on the same VLAN.
In order for Velocity to automatically assign multicast IP addresses to OmniStream devices, the destination IP
addresses for the session streams must be cleared.
Getting Started
1. Launch a web browser and enter the IP address of Velocity, in the address bar.
2. Enter the required login credentials.
3. Click the LOGIN button.
NOTE: The following steps are required only if a pre-existing multicast IP address is
assigned to each session and if automatic assignment of these multicast IP addresses, using
Velocity, is desired.
Bekijk gratis de handleiding van Atlona AT-OMNI-111, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-OMNI-111 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 21597 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Breedte | 208 mm |
| Diepte | 112 mm |
| Hoogte | 34 mm |
| LED-indicatoren | Ja |
