Atlona AT-HDVS-200-TX-PSK handleiding
Handleiding
Je bekijkt pagina 11 van 41
AT-HDVS-200-TX / AT-HDVS-200-TX-PSK
11
Installation
• Setting DHCP mode
1. Connect to the AT-HDVS-200-TX using RS-232 or Telnet.
2. At the command line, execute the IPDHCP command using the on argument, as shown. All characters are
case-sensitive.
IPDHCP on
Once DHCP is enabled, the unit will be assigned an IP address by the DHCP server (if present).
Using the Web GUI
The System page (page 28), in the web GUI, allows the AT-HDVS-200-TX to use either DHCP or static IP mode.
In order to access the web GUI, the IP address of the AT-HDVS-200-TX must be known.
1. Open the desired web browser and enter the IP address of the AT-HDVS-200-TX.
2. Log in, using the required credentials. The factory-default username and password are listed below:
Username: root
Password: Atlona
3. Click the System tab.
4. Click the IP Mode toggle to switch between the DHCP and STATIC IP setting.
When set to STATIC IP, the IP, Netmask, and Gateway elds can be modied.
5. Click the Save button to save the changes.
Bekijk gratis de handleiding van Atlona AT-HDVS-200-TX-PSK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-HDVS-200-TX-PSK |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4801 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 290 g |
| Breedte | 127 mm |
| Diepte | 102 mm |
| Hoogte | 38 mm |
