Atlona AT-HDVS-150-TX-WP handleiding
Handleiding
Je bekijkt pagina 8 van 16
AT-HDVS-150-TX-WP
8
Installation
1. Connect an Ethernet cable, up to 230 feet (70 meters), from the HDBaseT OUT port, on the back of the wall
plate, to an HDBaseT-compatible receiver (not included). Ethernet cables should use EIA/TIA-568B termination.
2. Assemble the AT-HDVS-150-TX-WP to the 2-gang electrical box or mud ring using the included screws.
When installing into an electrical box, the depth of the box must provide at least 40 millimeters of clearance.
• US version
Secure the wall plate with the four (included) shorter screws.
• UK version
Secure the wall plate with the two (included) longer screws.
3. Connect an HDMI cable from the HD source to the HDMI IN port on the wall plate.
4. Connect a VGA cable from a VGA source to the VGA IN port on the wall plate.
5. Connect a 3.5 mm mini-stereo cable from the AUDIO IN port on the switcher to the analog audio source.
This port allows two-channel analog audio to be included when the VGA IN port is selected. Refer to Passing
Analog Audio (page 11) for more information.
No power supply is required for the AT-HDVS-150-TX-WP. This unit will be powered over the Ethernet cable,
from an HDBaseT receiver.
Connection Instructions
NOTE: Although the wall installation of the US and UK version will dier, the following connection
instructions apply to both the AT-HDVS-150-TX-WP and AT-HDVS-150-TX-WP-UK.
Bekijk gratis de handleiding van Atlona AT-HDVS-150-TX-WP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-HDVS-150-TX-WP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1915 MB |
Caratteristiche Prodotto
| Gewicht | 370 g |
| Diepte | 40 mm |
| Hoogte | 35 mm |
| Soort | AV-zender |
| Kleur | Ja |
