Atlona AT-ETU-SYNC handleiding
Handleiding
Je bekijkt pagina 9 van 23
AT-ETU-SYNC
9
The AT-ETU-SYNC includes 10 EDID modes, which can be selected using the EDID dial.
1. Power the AT-ETU-SYNC.
2. Rotate the EDID dial to the desired EDID mode (0 - 9). Refer to the table above for a listing of available EDID
modes.
3. Connect an HDMI cable from the display to the HDMI OUT port on the AT-ETU-SYNC.
4. Connect another HDMI cable from the source to the HDMI IN port on the AT-ETU-SYNC.
5. Power the source.
6. Power the sink device.
7. The source will use the selected EDID mode when sending audio/video data to the sink device.
Selecting an EDID
Mode Description Mode Description
0
Learn mode
5
4K 60 4:2:0 / multichannel (HD lossless)
1
1080p 3D / 2 channel
6
4K 60 4:2:0 HDR / 2 channel
2
1080p 3D / multichannel (lossless)
7
4K 60 4:2:0 HDR / multichannel (HD lossless)
3
1080p DVI
8
4K 60 4:4:4 8-bit / 2 channel
4
4K 60 4:2:0 / 2 channel
9
4K 60 4:4:4 8-bit / multichannel (HD lossless)
2
EDID dial
IMPORTANT: By default, EDID mode 0 is blank. If an EDID has not been saved to mode 0, then refer
to Learning an EDID (page 10) for information.
NOTE: The EDID dial can be set to any EDID mode, while the AT-ETU-SYNC is powered and
connected to the system.
Device Operation
Bekijk gratis de handleiding van Atlona AT-ETU-SYNC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-ETU-SYNC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2950 MB |
