ATen KX9980R handleiding
Handleiding
Je bekijkt pagina 41 van 282
Chapter 1. Introduction
25
15 USB Type-A ports
(console P)
Use these ports for virtual media or a USB peripheral
device.
Note: 1. When using a USB disk plugged into this
port, see USB Mode, page 125.
2. This USB port supports isochronous
endpoints.
16 DisplayPort input port
(computer / reserved)
This port is reserved for future expansion.
17 function switch Use this slide switch to set the unit’s mode:
Extension: Sets the device to use the normal TX to
RX extension mode.
RS-232 Config: The device is ready to be
configured via serial commands through the RS-232
port.
18 grounding terminal The wire used to ground the unit connects here.
No. Component Description
Bekijk gratis de handleiding van ATen KX9980R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ATen |
| Model | KX9980R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29241 MB |
