Asus R2314I-IM-A handleiding
Handleiding
Je bekijkt pagina 48 van 70
48
Industrial motherboard
Parity
A parity bit can be sent with the data bits to detect some transmission errors. [Mark] and [Space] parity do
not allow for error detection.
[None] None
[Even] parity bit is 0 if the num of 1’s in the data bits is even
[Odd] parity bit is 0 if num of 1’s in the data bits is odd
[Mark] parity bit is always 1
[Space] parity bit is always 0
Stop Bits
Stop bits indicate the end of a serial data packet. (A start bit indicates the beginning.) The standard setting is
1 stop bit. Communication with slow devices may require more than 1 stop bit.
Configuration options: [1] [2]
Flo
w Control
Flow control can prevent data loss from buffer overflow. When sending data, if the receiving buffers are full,
a “stop” signal can be sent to stop the data flow. Once the buffers are empty, a “start” signal can be sent to
re-start the flow. Hardware flow control uses two wires to send start/stop signals.
Configuration options: [None] [Hardware RTS/CTS]
VT
-UTF8 Combo Key Support
This allows you to enable the VT -UTF8 Combination Key Support for ANSI/VT100 terminals.
Configuration options: [Disabled] [Enabled]
Recor
der Mode
With this mode enabled only text will be sent. This is to capture Terminal data.
Configuration options: [Disabled] [Enabled]
Resolution 100x31
This allo
ws you to set the number of rows and columns supported on the Legacy OS.
Configuration options: [Disabled] [Enabled]
Putt
y Keypad
This allows you to select the FunctionKey and Keypad on Putty.
Configuration options: [VT100] [LINUX] [XTERMR6] [SCO] [ESCN] [VT400]
Legac
y Console Redirection Settings
Redirection COM Port
Allows you to select a COM port to display redirection of Legacy OS and Legacy OPROM Messages.
Configuration options: [COM1] [COM2] [COM3] [COM4] [COM5] [COM6]
Resolution
This allo
ws you to set the number of rows and columns supported on the Legacy OS.
Configuration options: [80x24] [80x25]
Redirec
tion After POST
[Always Enable] Legacy Console Redirection is enabled for legacy OS.
[Bootloader] Legacy Console Redirection is disabled before booting to legacy OS.
Bekijk gratis de handleiding van Asus R2314I-IM-A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asus |
| Model | R2314I-IM-A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5688 MB |
