Asus PRIME X399-A handleiding
Handleiding
Je bekijkt pagina 86 van 96
4-2
Chapter 4: RAID Support
Chapter 4
4.1.2 InstallingSerialATAharddisks
The motherboard supports Serial ATA hard disk drives. For optimal performance, install
identical drives of the same model and capacity when creating a disk array.
To install the SATA hard disks for a RAID conguration:
1. Install the SATA hard disks into the drive bays.
2. Connect the SATA signal cables.
3. Connect a SATA power cable to the power connector on each drive.
4.1.3 SettingupRAIDfromRAIDXpert2Conguration
UtilityinUEFIBIOS
You must enable the RAID function in the BIOS Setup before creating RAID set(s) using
SATA hard disks :
1. Enter the BIOS Setup during POST.
2. Go to the Advanced menu > SATAConguration, then press <Enter>.
3. Set the SATAModeitem to [RAID].
4. Go to the Boot menu > CSM(CompatibilitySupportModule)> LaunchCSM, then
set the item to [Disabled].
5. Save your changes and exit the BIOS Setup, then enter the BIOS Setup again.
6. Go to the Advanced menu > RAIDXpert2CongurationUtility, then press <Enter>
to display the RAIDXpert2 conguration utility menu.
Refer to Chapter 3 for details on entering and navigating through the BIOS Setup.
Due to chipset limitation, when SATA ports are set to RAID mode, all SATA ports run at
RAID mode together.
Bekijk gratis de handleiding van Asus PRIME X399-A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asus |
| Model | PRIME X399-A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8909 MB |
Caratteristiche Prodotto
| Breedte | 305 mm |
| Diepte | 269 mm |
| Gebruikershandleiding | Ja |
| Ethernet LAN | Ja |
| Type stroombron | ATX |
