Asus NUC13BRF handleiding
Handleiding
Je bekijkt pagina 34 van 46
24
Table 18. States for a One-Color Power LED
LED State
Description
Off
Power off
Blinking
Standby
Steady
Normal operation
Table 19. States for a Dual-Color Power LED
LED State
Description
Off
Power off
Blinking (white)
Standby
Steady (white)
Normal operation
NOTE
The LED behavior shown in is default – other patterns may be set via BIOS setup.
2.6.6.4 Power Switch Header
Pins 6 and 8 can be connected to a front panel momentary-contact power switch. The switch
must pull the SW_ON# pin to ground for at least 50 ms to signal the power supply to switch on
or off (the time requirement is due to internal debounce circuitry on the board). At least two
seconds must pass before the power supply recognizes another on/off signal.
2.6.6.5 BIOS Security Jumper
CAUTION
Do not move a jumper with the power on. Always turn off the power and unplug the power
cord from the computer before changing the jumper setting. Otherwise, the board could be
damaged.
Bekijk gratis de handleiding van Asus NUC13BRF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asus |
| Model | NUC13BRF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5915 MB |
