Aspes ATE50S handleiding

Handleiding

12345678910111213141516/ 16

Afdrukken

Je bekijkt pagina 7 van 16

Instructions for use and maintenancе 7

EN

English

Temperature setup (for models with adjustable

thermostat) - This setup allows the gradual setting

of the desired temperature, achieved by using a

handle on the control panel.

THE CONTROL LAMP on the panel indicates the

state (the mode) in which the appliance is placed: it

is lit when the water is being heated and is switched

o󰀨 when the specied by the thermostat water

temperature level is reached.

Position e (Energy-save mode) – At this mode,

water temperature reaches up to approximately 60

°С. Heat losses are reduced in this way.

Protection according to the temperature (valid

for all models).

The appliance is equipped with a special facility

(thermal circuit-breaker) for protection against over-

heating of the water, which is switching o󰀨 the heater

from the electricity network, when the temperature

reaches too high values.

Attention! When this device operates, it does not

self-reset and the appliance will not work. Please

call an authorized service for solving the

problem.

VIII. PERIODIC MAINTENANCE

Under normal use of the heater, under the inuence

of high temperature, lime scale /the so-called lime

scale layer/ is deposited upon the heating element’s

surface. This worsens the heat exchange between

the heating element and water. The heating

element’s surface temperature increases along /of

boiling water/. The thermoregulator begins to switch

on and o󰀨 more frequently. A ‘’deceptive” activation

of the thermal protection is possible. Due to these

facts, the manufacturer recommends preventive

maintenance of your water heater every two years

by an authorized service center or service base. This

protective maintenance must include cleaning and

inspection of the anode protector (for water heaters

with glass-ceramic coating), which shall be replace

with a new one if need arises. Each preventive

maintenance of the said type must be entered in the

appliance’s warranty card and must outline date of

performing the preventive maintenance, company

performing the preventive maintenance, name of

person performing the preventive maintenance, and

signature.

Non-fulllment of the above requirement may

terminate the free of charge maintenance of your

boiler. In order to clean the appliances use a damp

cloth. Do not clean with abrasive or solvent content

detergents. Do not pour water over the appliance.

The manufacturer does not bare the

responsibility for all consequences caused by

not obeying the instructions, given hereby.

DISPOSAL OF PACKAGING AND PRODUCT

Dispose of packaging in an

environmentally-friendly manner.

This appliance is labelled in accordance

with European Directive 2012/19/EU

concerning used electrical and electronic

appliances (waste electrical and electronic

equipment - WEEE). The guideline determines the

frame work for the return and recycling of used

appliances as applicable throughout to the EU.

PACKAGE INFORMATION:

Packaging materials of the product are manufactured

from recyclable materials in accordance with

our National Environment Regulations. Do not

dispose of the packaging materials together with

the domestic or other wastes. Take them to the

packaging material collection points designated by

the local authorities

12345678910111213141516/ 16

Bekijk gratis de handleiding van Aspes ATE50S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Andere merken in Niet gecategoriseerd