Ashly DigiMIX 24 handleiding
Handleiding
Je bekijkt pagina 6 van 36
Operating Manual - digiMIX24 Digital Mixer
6
2 MIXER CONTROLS
2.1 Input Trim
This controls the gain of the analog mic or line input preamplier. For analog inputs, this is the most important control for set-
ting up proper gain structure in the mixer. Properly set, it helps to avoid clipping and maintains low noise. A good rule is that
with typical input signal present on a channel, adjust the trim control to allow 20dB headroom between the expected signal's
peak level and when it clips. In other words, normal signal peaks should be around "0" on the meter. Set this control rst and
then leave it alone unless the input source changes. Do not use the trim control to adjust mix volume later on, use the channel's
fader control instead.
2.2 Input/Output LEDs
Input LEDs indicate the signal level of each input in dBu, after the preamplier stage but pre-fader. Output LEDs (Sub & Main)
indicate signal level at the output. They can alternately indicate every channel's current fader position by pressing the Faders/
Meters button (sec. 2.23).
2.3 Select Button
Every input, subgroup, main output, aux, and effect (FX) has a dedicated select button. All routing assignment, DSP, sends
functions, and motorized fader activity are applied only to the selected channel. This allows the user to quickly change from
one channel to the next from any mixer function.
2.4 USB 2-Trk I/O Port
This is used to connect with a USB stereo audio device for playback or recording. It is not for software control of the mixer.
USB audio input is always sent to channels 23-24, and is adjusted using the USB 23-24 level control (sec. 2.9). USB audio output
uses the main L/R output signal. Audio resolution & sampling rate for 2-track USB audio on the digiMIX24 is 16 bit @ 48kHz.
2.5 Headphone Out
Plug in headphones here for monitoring the main outputs or selected solo channels. Use the Headphones Level control to adjust
volume
2.6 Meter/Solo Button
Press this button to toggle the two LED bars directly above it from indicating either the Stereo Main signal level, or the Stereo
Solo level.
Bekijk gratis de handleiding van Ashly DigiMIX 24, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ashly |
| Model | DigiMIX 24 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10179 MB |
