Arturia Mix DRUMS handleiding
Handleiding
Je bekijkt pagina 41 van 58
5.3.3.2. Clean Highs
When you select the LOW or MID/HIGH modules and have the Distortion turned on, an
option called Clean Highs appears to the right of the Visualizer graph. Any highs that are
above the Distortion Crossover frequency are shown in pale orange that overlaps the Mid/
High signal; these are the Clean Highs, so named because they are dry and unprocessed.
You can choose to pass some of this signal through to the output, set to a level anywhere
from Off to +24.0 dB. Click and drag up/down on the numerical display to set the Gain.
Double-click to set Clean Highs to the default of 0.00 dB.
5.3.4. Mid/High Shaper and Clipper
The Clean Highs and output of the Distortion are summed together, put through the Tilt EQ
[p.34], and then to the Mid/High Shaper and Clipper.
The controls and metering for the Mid/High Shaper and Clipper are identical to those of the
Low Shaper and Clipper [p.33].
After this, the Low and Mid/High signals are summed back together, and sent to the SPACE
processor.
Distortion Filter cutoffs: Pre and Post
Clean Highs (pale orange in the Visualizer) with Gain setting
Arturia - User Manual Mix DRUMS - The Audio Path 36
Bekijk gratis de handleiding van Arturia Mix DRUMS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Arturia |
| Model | Mix DRUMS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6795 MB |
