Arturia MiniBrute SE handleiding
Handleiding
Je bekijkt pagina 43 van 51

Arturia MiniBrute SE User's Manual 43
center positive.
The Power button turns the power on/off.
4.3.2 USB
The USB outlet interfaces with a personal computer. It can be used for
MIDI communication, as well as editing some of the synthesizer internal
parameters such as MIDI channel or velocity curves, or updating the
Sequencer firmware, through the MiniBrute Connection software [4.4].
4.3.3 MIDI
The MIDI Out and In jacks let your MiniBrute communicate with
other MIDI devices. The MiniBrute can serve as a MIDI polyphonic
controller or MIDI sound module. If you are using MiniBrute as a
sound module, use a MIDI cable to connect MiniBrute MIDI In
connector your external MIDI device’s MIDI Out connector. To
control an external MIDI device from MiniBrute keyboard, patch a MIDI cable from
MiniBrute MIDI Out connector to your external MIDI device’s MIDI IN connector.
By factory setting, the MiniBrute sends and responds on MIDI channel 1. This can be easily
changed through the MiniBrute Connection software [4.4].
4.3.4 Gate Source
The Gate Source switch selects which gate signal triggers the
MiniBrute envelopes. The default KBD triggers the gate from the
keyboard. Hold mode forces the envelope to the SUSTAIN stage
independently from any other gate source. This mode is very useful for
drones, because there is no need to press a key and you can use both hands to
tweak the knobs! In Audio mode, a gate signal is generated when the signal level
at the AUDIO In [4.3.5] reaches an internally preset threshold.
The threshold value for the Audio mode, as well as several other general settings, can be
adjusted through the MiniBrute Connection software [4.4].
4.3.5 AUDIO
Connect the Master Out with an unbalanced audio cable to
an audio mixer, a computer’s sound card, or directly to an
audio amplifier. The Master Volume knob [4.2.8.6] controls the
output level.
You can connect any audio source (synthesizer, pre-amplified guitar, output of a
mixer, etc.) to the AUDIO In jack, and process the incoming signal with the
Bekijk gratis de handleiding van Arturia MiniBrute SE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Arturia |
| Model | MiniBrute SE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11481 MB |







