ART Multiverb Alpha 2.0 handleiding
Handleiding
Je bekijkt pagina 16 van 61
12
appears don't panic, presets 1 through 110 are factory presets and though the
parameters may be changed, the new values cannot be stored without first
UNLOCKING the presets (see UTILITY section).
TO DELETE A STORED PRESET, thereby releasing its memory to be used again, you
must store a null preset at the preset number you wish to delete. A null preset
consists of a blank title (all spaces, displayed as <blank title>) and no effects
(displayed as <no effects>). Factory Preset 100 is programmed blank to make it
easy to delete stored presets. Presets 111 through 200 are null when you receive
your unit or after a factory reset.
REC/ARM
YOU MUST BE USING A PRESET SET UP
FOR SAMPLING AND IN THE EDIT MODE FOR THIS FUNCTION TO OPERATE
While you are using any of the Sampler algorithms you will need to "reset" the
record parameter to be ready to record another sample. The REC/ARM button allows
you to return the Sampler to Record-Ready status. Pressing this button wipes out
the existing sample and resets the length to the original stored preset value.
To reset the MULTIVERB ALPHA 2.0 to record a new sample, press the REC/ARM
button.
TRIGGER
YOU MUST BE USING A PRESET SET UP
FOR SAMPLING AND IN THE EDIT MODE FOR THIS FUNCTION TO OPERATE
This button accesses two parameters for the Sampler algorithm. It allows you to
either record a sample of the program material or play back that portion (sample)
of material you recorded.
When you first recall a Sampler preset it is usually geared up and ready to
record a sample. Most of the Factory Presets using the Sampler in the ALPHA 2.0
are "record/ready". When the preset is recalled and signal is present to the
ALPHA 2.0, the record is automatically triggered. All you need to do is press the
TRIGGER button to playback the sample.
Now you may replay this sample as recorded at any time by pressing the button
again. If the PLAY parameter is set in the SINGLE position and you hit the button
quickly and repeatedly, you will get that stuttering "rap" effect. The sampled
sound can be played back by hitting the button, MIDI, or using a footswitch
connected to a properly programmed REMOTE jack.
You may determine the length of the sample time regardless of what the Length
parameter is set for in the Preset with this button. Say your Length is set for
1.50 seconds and you feel the length should end at a specific point less than 1.5
seconds. All you need to do is press the TRIGGER button once when you feel the
sample should stop. This automatically sets the Length parameter for that amount
of time.
NOTES:
1) You will have to reset the LENGTH parameter back to its original value if the
full length is required. To do this simply hit the RECALL button, doing this will
restore the LENGTH parameter to its original value. (It is assumed the preset has
been STORED)
Bekijk gratis de handleiding van ART Multiverb Alpha 2.0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ART |
| Model | Multiverb Alpha 2.0 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3879 MB |
