ARRI SkyPanel S360-C handleiding
Handleiding
Je bekijkt pagina 33 van 44
33
NetworkingNetworking
33
Network Settings
The Network Settings menu contains various parameters for setting up the SkyPanel in a network.
Link
Shows whether the SkyPanel is connected to a network.
IP
When the SkyPanel is connected to a network, the display shows its IP address.
Mode
Sets the IP mode. In DHCP mode, the IP address, gateway, DNS1 and DNS2 are automatically assigned
to the fixture by the network. You should use this mode if possible.
The parameters Art-Net 2.x.x.x.x and Art-Net 10.x.x.x are used to set up the fixture in an Art-Net
network. Manual enables the assignment of a fixed IP address.
Mask
Shows the network mask.
Gateway
Shows the gateway address.
DNS1 / DNS2
DNS addresses of the fixture.
MAC
Shows the MAC address of the fixture.
BONJ
The SkyPanel can be found automatically in a network via the Bonjour application. Activate or deactivate
Bonjour In the BONJ menu. You can also set the status via RDM or the Web Portal.
If Bonjour is disabled, the fixture cannot be automatically detected by ARRI Lighting Service Manager.
MDNS
Displays the MDNS address of the fixture (ID and serial number of the device).
ARRI Lighting Service Manager
Please find information about the features and the functionality of the ARRI Lighting Service Manager in
the user manual for the ARRI Lighting Service Manager. You can download it with the ARRI Lighting
Service Manager software-bundle from the ARRI web site www.arri.com/lightingsoftware free of charge.
Bekijk gratis de handleiding van ARRI SkyPanel S360-C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ARRI |
| Model | SkyPanel S360-C |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4458 MB |
