ARRI SkyPanel S360-C handleiding
Handleiding
Je bekijkt pagina 32 van 44
Networking
32
Networking
Art-Net and sACN
From firmware version 2.0 the SkyPanel supports Art-Net. Art-Net is a network protocol to control devices.
Here is a brief explanation of some basic terms being used by Art-Net. For more detailed information,
please visit the web site of the Art-Net developers: www.artisticlicence.com.
The SkyPanel is capable of processing Art-Net for up to ten universes with one sender and three universes
with two senders.
Generals rules of thumb:
• Maximum of 4 universes of Art-Net Art-DMX unless you really have to,
• All universes of sACN.
Please find more information about sACN in the standard ANSI E1.31. Please observe all information given
there to set up a proper network.
Art-Net IP Address
When setting the IP address manually, please take care the address is in the range 2.0.0.1 to
2.255.255.255 (Network switch off) or 10.0.0.1 to 10.255.255.255 (Network switch on). Any other range is
not according to the Art-Net standard and problems might occur.
Art-Net Net
A group of 16 consecutive Sub-Nets or 256 consecutive Universes is referred to as a net. There are 128
Nets in total.
Sub-Net
A group of 16 consecutive universes is referred to as a sub-net. (Not to be confused with the subnet mask).
Universe
A single DMX512 frame of 512 channels is referred to as a Universe.
Art-Net Merge Mode
The Art-Net protocol allows multiple nodes or controllers to transmit ArtDmx data to the same
universe.Merging is limited to two sources. If there are additional sources, merging will be de-activated.
The Merger can act as an LTP or HTP merger (LTP = Latest Takes Precedence, HTP = Highest Takes
Precedence).
Art-Net Gateway
With enabled Art-Net gateway the SkyPanel makes all 512 channels of the used universe available at its
DMX connectors.
The menu Art-Net Settings contains all parameters to set up a SkyPanel in an Art-Net network. Please find
a detailed description in the chapter Features of the Fixture Menu on page 7.
The Art-Net gateway is RDM capable. All RDM compatible devices in a network can be detected by the
integrated RDM controller. RDM management over Art-Net is supported.
Bekijk gratis de handleiding van ARRI SkyPanel S360-C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ARRI |
| Model | SkyPanel S360-C |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4458 MB |
