Handleiding
Je bekijkt pagina 9 van 22
32V 01/24
HOW TO USE THE APPLIANCE
This appliance can be used for Cooling, Heating, Dehumidication and Fan. Before using the appliance, leave it in
an upright position for at least two hours.
Plug the power cord into an appropriate power outlet (250~V). Insert the supplied battery into the remote controller,
observing the polarities. Select the desired operating mode from the remote controller.
The air conditioner is equipped with a protection system which causes the unit to activate in Cooling, Heating,
Dehumidication and Heating mode only after an interval of approximately 3 minutes from the selection. Even when
passing from one mode to another, the fan continues to operate, but the compressor stops to restart after 3 minutes.
This start delay protects the compressor from overload.
This appliance is equipped with an automatic defrosting system which intervenes when the unit is running hot and ice
forms on the coil. When the appliance starts defrosting, the Power LED ashes on the control panel. The compressor
stops for 10 minutes, after which the appliance resumes normal operation.
THE DISCHARGE TUBE MUST ALWAYS BE CONNECTED to the appliance: the only exception is when the appliance
is used solely for dehumidication, in which case it is advisable to let the appliance discharge directly into the
environment for maximum efciency (consult the “Dehumidication Mode” paragraph).
Regularly clean the air lters to keep the air conditioner working efciently.
Cooling, Heating, Fan Dehumidifying
Bekijk gratis de handleiding van Argoclima Twiggy Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Argoclima |
| Model | Twiggy Plus |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 2439 MB |
