Argoclima Twiggy Plus handleiding

22 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 10 van 22
33V 01/24
OPERATING MODES
1. COOLING MODE
Press the MODE button to select the cooling mode. The LED on the control panel will turn on.
Press the UP/DOWN buttons on the control panel to select the desired temperature, which will appear on
the control panel display.
The temperature adjustment range is from 16°C to 32°C.
In this mode it is possible to adjust the ventilation speed (Fan Speed), set the vertical oscillation of the louvers
with the SWING button, set the Timer and the SLEEP function.
For quieter operation, reduce the speed to minimum (low).
2. HEATING MODE
Press the Mode button on the control panel to select the Heating mode. The LED on the control panel
lights up.
Press the UP/DOWN buttons on the control panel to select the desired temperature, which will appear on
the control panel display.
The temperature adjustment range is from 16°C to 32°C.
In this mode it is possible to adjust the ventilation speed (Fan Speed) and set the Timer and the SLEEP function.
For quieter operation, reduce the speed to minimum (low)
3. DEHUMIDIFICATION MODE
Press the MODE button to select the Dehumidication mode. The LED on the control panel lights up.
The temperature is controlled by the electronic board and cannot be adjusted.
The fan speed is xed at low and cannot be adjusted.
NOTE
The air conditioner does not cool the room when operating as a dehumidier.
When the appliance is used as a dehumidier, the exible pipe must not be connected.
For maximum dehumidication efciency, leave the rear discharge attachment free to discharge directly into the
environment.
The dehumidication mode is recommended during autumn and winter.
If used during summer, it is best to leave the exible pipe attached so that the hot air is discharged towards the
outside rather than into the room.
During dehumidication, continuous drainage should be implemented (see the next chapter, “HOW TO
ELIMINATE CONDENSATE”).
4. FAN MODE
Press the MODE button to select the Ventilation mode. The LED on the control panel lights up.
In this mode it is possible to adjust the ventilation speed (Fan speed).
The temperature cannot be adjusted.

Bekijk gratis de handleiding van Argoclima Twiggy Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkArgoclima
ModelTwiggy Plus
CategorieAirco
TaalNederlands
Grootte2439 MB