Arecont Vision SurroundVideo Omni SX AV12276DN-NL handleiding

Bewakingscamera

Arecont Vision

40 pagina's

PDF beschikbaar

Handleiding

Installation Manual

Page | 18 support@arecontvision.com

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com

SurroundVideo® Omni G2

Pole Mount

For a pole mount installation, the AV-WMJB wall mount, AV-PMA pole mount, and SO-CAP mount cap

are required (sold separately). A pole mount should only be attached onto hard ceilings including wood,

plastic, metal, and concrete.

1. Using the mounting template, prepare the mounting provisions for the camera installation.

2. Connect the wall mount cap and wall mount.

3. Attach the AV-JBA (Junction Box Adapter) to the Pole Mount Adapter (Figure 1).

4. Remove the conduit plug on the junction box adapter and connect ¾” NPT conduit to the

junction box adapter (Figure 1).

Figure 1: Attach conduit to AV-JBA junction box adapter

Reference #

Description

Remove conduit plug

Connect ¾” NPT conduit to junction box adapter (ensure

use of water seal tape)

NOTE: Use silicon or water pipe seal tape to make sure no water leakage between conduit pipe

and junction box adapter.

5. Run the Ethernet cable and outside power cable (if necessary) through the supplied rubber

gasket and then through the Junction Box Adapter and SV-WMJB, Wall Mount Adapter. Ensure

the gasket is seated properly.

6. Attach the Wall Mount Adapter (SV-WMJB) to the Pole Mount Adapter (AV-PMA) as shown in

Figure 2.

Bekijk gratis de handleiding van Arecont Vision SurroundVideo Omni SX AV12276DN-NL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.