Arecont Vision SurroundVideo Omni SX AV12276DN-NL handleiding

Bewakingscamera

Arecont Vision

40 pagina's

PDF beschikbaar

Handleiding

Installation Manual

Page | 17 support@arecontvision.com

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com

SurroundVideo® Omni G2

Wall Mount

For a proper wall mount installation, the AV-WMJB wall mount and SO-CAP wall mount cap are

required (sold separately). A wall mount should only be attached onto hard ceilings including wood,

plastic, metal, and concrete.

1. Using the Mounting template, prepare the mounting provisions for the camera installation.

2. Connect wall mount cap and wall mount as shown in Figure 1.

Figure 1: Attach wall mount cap to the wall mount

NOTE: The thread size for Top shield, pendant pole and mount is 1.5” NPT.

3. Run Ethernet Cable and outside power cable (if necessary) through the supplied rubber gasket

and then through the wall mount. Ensure the gasket is seated properly.

4. Attach the wall mount to the wall using drywall screws or any optional hardware suitable for the

mounting surface.

Figure 2: Attach the camera to the SO-CAP with the supplied screws

5. To configure the camera, reference the camera discovery, set-up and configuration section.

Bekijk gratis de handleiding van Arecont Vision SurroundVideo Omni SX AV12276DN-NL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.