Arecont Vision MicroDome G2 AV1555DN-F handleiding

Bewakingscamera

Arecont Vision

22 pagina's

PDF beschikbaar

Handleiding

!! ! Installation!Manual!

Page | 8 support@arecontvision.com

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com

MicroDome®!G2

NOTE: Ensure not to press the remote focus motor against the sides of camera module when adjusting

the field of view (Figure 5).

Figure 5: Remote focus motor

9. Install the dome cover by aligning the captive fastener with the mating threaded insert on the

camera housing. The cover is held in place by magnets.

CAUTION! The magnets are meant to hold the dome cover in place during installation. The

captive fastener must be used to properly secure the dome cover. Failure to use the captive

fastener may result in serious injury. When mounting the dome cover to the camera

housing, ensure that the gasket is properly seated and not folded. Failure to do so may

result in water and dust ingress.

Reference #

Description

Captive Fastener

10. Tighten the captive fastener with the supplied Philips head screwdriver to secure the dome

cover in place.

NOTE: The supplied security torx screw may also be used.

Bekijk gratis de handleiding van Arecont Vision MicroDome G2 AV1555DN-F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.