Arecont Vision MicroDome G2 AV1555DN-F handleiding

Bewakingscamera

Arecont Vision

22 pagina's

PDF beschikbaar

Handleiding

!! ! Installation!Manual!

Page | 7 support@arecontvision.com

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com

MicroDome®!G2

4. Pull the network cable through the ceiling and plug it into the network connector on the

camera housing (Note: this can be done at a later time if there is access to the network

connector on the camera housing after installation into the ceiling).

5. Check that the indicator LED’s are illuminated to the desired conditions (see LED Indicator

table).

6. Push the three spring actuated retention arms to the upward position as shown in the

diagram.

7. Insert the camera housing through the ceiling until the retention arms lock into place.

8. Adjust the pan and tilt to obtain the desired field of view. Then, lock the camera head in

place by tightening at least two of the three set-screws with the supplied flat-head

screwdriver. Do not over torque the screws.

! !

Bekijk gratis de handleiding van Arecont Vision MicroDome G2 AV1555DN-F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.