Handleiding
Je bekijkt pagina 41 van 108
EN / 41
1. From the Advanced Options menu, se-
lect
/
TKGS and press the .
ð TKGS Setting menu will be displayed.
6.11.1 Operation Mode
1. From the TKGS Setting menu, use the
/
to select Operation Mode and
press the .
2. Use the
/
to select Auto , Flexible or
TKGS Off and press the .
Note:
• If the TKGS operation mode is selected
Auto , thenChange Channel Location, Re-
locate and Edit Channel are not active.
Select Flexible or TKGS Off to edit the
channels.
3. Press the to return to the previous
menu or press the to return to the
broadcast.
6.11.2 TKGS Locator List
1. From the TKGS Setting menu, use the
/
to select TKGS Locator List and
press the .
2. Press the Click to add location .
3. Use the
/
to select Frequency and
press the .
4. Use
...
to enter the frequency for
the channel location list, select the
key from the virtual keyboard and press
the .
5. Use the
/
to select Symbol Rate
(Ksym/s) and press the .
6. Use
...
to enter the symbol rate of
the frequency for the channel location
list, select the key from the virtual
keyboard and press the .
7. Use the
/
to select Polarization and
press the .
8. Use the
/
to select the polarisation
and press the .
9. Use the
/
to select Programme ID
and press the .
10.Use
...
to select the programme ID
of the frequency for the channel location
list, select the on the virtual keyboard
and press the .
11.Use the
/
to select Save Location
and press the .
Note:
• More than one frequency may be entered
for the TKGS Locator list. Repeat 2 to 11
add different frequencies.
12.Press the twice to return to broad-
cast.
6.11.3 Resetting Table Version
1. From the TKGS Setting menu, use the
/
to select Reset Table Version and
press the .
2. A warning message will be displayed.
3. Select OK to confirm the reset or select
Cancel to cancel it, and press the .
4. Press the to return to the previous
menu or press the to return to the
broadcast.
6.12 Signal Information
1. From the Advanced Options menu, use
the
/
to select System information
and press the .
ð – System information will be dis-
played.
Notes:
• Signal information changes depending
on the current source.
• The signal level not only depends on your
receiver system, but also on the channel
which is currently active. Remember this
when aligning your antenna using the sig-
nal level display.
2. Press the to return to the previous
menu or press the to return to the
broadcast.
Bekijk gratis de handleiding van Arcelik A65 E 895 A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Arcelik |
| Model | A65 E 895 A |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 10639 MB |
