Aqara Valve Controller T1 handleiding
Handleiding
Je bekijkt pagina 8 van 14
3. Use an Allen key or pliers to rotate counterclockwise, loosen the hex nut located
below the device, and disassemble the nut, washer, and the swing arm for lever
handles.
4. Install the butterfly handle swing arm onto the device in the following order: nut
from the accessory package, swing arm, and then the securing nut.
Note: when installing, do not tighten the nut to the point of locking it. Once
installation is complete, operate the device once to check if the device is functioning
properly.
5. Move the device onto the valve, secure the arm with the valve handle, and pay
attention to the installation position of the device. Ensure that the axis of the swing
arm aligns with the valve handle’s.
Bekijk gratis de handleiding van Aqara Valve Controller T1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Aqara |
| Model | Valve Controller T1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2997 MB |