Aqara Valve Controller T1 handleiding
Handleiding
Je bekijkt pagina 7 van 14
re-fix it. The installation is complete when you make sure that the device remains
stable in the working condition.
Note: When adjusting the stability of the device, please remove the battery to prevent
accidentally touching the device during the adjustment process, resulting in the
operation of the device and causing inconvenience.
Butterfly Valve Type Installation
1. Find the valve piping where you plan to install the equipment, manually switch the
valve once to ensure it can be normally turned on and off, and then adjust the valve to
the open position.
Note: A space of at least 187 * 248 mm should be reserved around the pipeline to
ensure there is enough room for equipment installation.
2. Open the butterfly handle valve accessory package and assemble the fixture.
Secure the swing arm and the clamp with three screws, while pre-installing the other
two screws in the holes below the clamp.
* Ensure the smooth side of the arm faces upwards; position the holes on the
underside of the clamp towards the inside of the arm.
Bekijk gratis de handleiding van Aqara Valve Controller T1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Aqara |
| Model | Valve Controller T1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2997 MB |