Aqara Valve Controller T1 handleiding

Handleiding

1234567891011121314/ 14

Afdrukken

Je bekijkt pagina 2 van 14

2. Pre-mount the 2 pieces of mounting bracket on the pipe using screws (do not

tighten the screws yet).

Note: The mounting bracket is suitable for pipes up to a maximum DN20 size. If there

is a large gap between the mounting bracket and the pipe during installation, please

insert the rubber gasket on the outer side of the pipe before securing it with the

mounting bracket.

3. Move the device to the valve, secure the swivel arm to the valve handle, and take

note of the mounting position of the controller, ensuring that the output shaft of the

unit aligns with the center axis of the valve swivel.

4. Tighten the mounting bracket screws to ensure the stability of the device.

1234567891011121314/ 14

Bekijk gratis de handleiding van Aqara Valve Controller T1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd