API Audio TCS-II handleiding
Handleiding
Je bekijkt pagina 10 van 42
TCS-II API
6
2.4 325 Output Section Signal Flow
The block diagram below illustrates signal flow through the 325 Line-Driver output section of the TCS-
II with only the CUT switch engaged.
2.5 Rear Panel Signal Flow
The TCS-II signal flow is illustrated by the right-to-left order of the unit’s rear panel. The order
of these interfaces remains constant, regardless of the order of the 527A Compressor and 550A
Equalizer in the signal path.
Second First
Output <---------------- Insert <---- Effect <-------- Effect <--------- 512C Preamp
• The PRE OUT is “half-normalled” to feed the FIRST EFFECT IN
• The FIRST EFFECT IN feeds the first processor in the audio path (normally the 527A
Compressor*)
• The FIRST EFFECT OUT is “half-normalled” to feed the SECOND EFFECT IN
• The SECOND EFFECT IN feeds the second processor in the audio path (normally the
550A Equalizer*)
• The SECOND EFFECT OUT is “half-normalled” to feed the 325 Line-Driver input
* Engaging the POST EQ switch will move the 527A Compressor to after the 550A Equalizer,
reversing the order of these effects in the audio path.
The PRE OUT, FIRST EFFECT OUT, and SECOND EFFECT OUT jacks are all splitting outputs.
This means the connection to the input they’re normalled to will not be broken when a plug is
inserted.
Bekijk gratis de handleiding van API Audio TCS-II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | API Audio |
| Model | TCS-II |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7243 MB |
