Antelope ZEN QUADRO handleiding
Handleiding
Je bekijkt pagina 43 van 86
Antelope Audio Zen Quadro Synergy Core User Manual
Page 43
As a rule of thumb, adjust gain until you get the input signal to consistently peak around -12dB
on the peak meter. If you manage that and there's an excessive amount of noise (such as hiss
and hum), decrease gain until you obtain a comfortable signal-to-noise ratio (the signal is not
too weak, and the noise is much quieter or inaudible). You can also try using a noise gate.
If none of these approaches produce satisfactory results, the problem could be in your signal
chain or equipment. For example, some low-sensitivity dynamic microphones are naturally
noisy when amplified; magnetic pickups on electric stringed instruments are prone to electro-
magnetic interference (EMI), which causes hum and buzz; electronic components in analog
equipment may deteriorate over time; low-quality and worn-out cables degrade signals, and
so on. Inspect your equipment, and practice proper gain-staging (make sure the output from
one unit in the signal chain to the input of the next is not too weak or too strong).
Peak meter
Visualizes the input signal strength. Peak meters are also present on the Zen Q Synergy
Core's display. When the peak meter is going into the red, it means the signal is too strong
and will be degraded by audible distortion and clipping. Occasional dips into the yellow are
acceptable.
48V Button
Bekijk gratis de handleiding van Antelope ZEN QUADRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Antelope |
| Model | ZEN QUADRO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12817 MB |
