Antari F-8 TYPHON handleiding
Handleiding
Je bekijkt pagina 11 van 28
9
Graph 1
Graph 2
Graph 3
1. Please see graph 1, remove the cover from the pointed place;
2. You will see a white cable like graph 2, pull it out and connect to the EasySwitch wireless receiver;
3. Screw it back to the machine like graph 3 and follow the instruction on 12.3 for pairing.
12.3 Pair & Unpair
Please follow the steps below to link or unlink W-DMX signal;
Step 1. Press W-DMX icon to enter the menu;
Step 2. Press W-DMX to activate the function;
Step 3A. It will automatically search for signal;
Step 3B. Press Unpair to unpair W-DMX signal;
12.4 Status of W-DMX
Signal on LCD display
Wireless DMX status
(Green)
W-DMX present
(Orange)
No DMX signal present
(Red)
Link to TX lost
(Grey)
Not assigned
13. Service and Maintenance
DANGER
Disconnect the power cord before starting maintenance operation.
Always keep the machine clean and dry.
Can use air compressor, vacuum or a soft brush to remove the dust on the machine.
Can use a slightly damp cloth to clean the casing.
Before store the machine, please make sure the machine is completely cool down to avoid moisture inside
causing malfunction.
It is recommended to run the machine at least once a month in order to maintain the machine’s best
performance and output condition.
Excessive dust and build up liquid residue will reduce the performance and cause overheat.
Bekijk gratis de handleiding van Antari F-8 TYPHON, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Antari |
| Model | F-8 TYPHON |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9985 MB |
