Anova OR9500 handleiding

Handleiding

123456789101112131415161718192021222324252627282930/ 30

Afdrukken

Je bekijkt pagina 24 van 30

EN

24

4. Remove the four M6x12 flange bolts and remove the front skid plate.

5. Remove the two M10 nuts with washers and remove the front skid plate.

6. Screw the two adjusting nuts in the direction shown in the figure and observe the

parking axles from both sides until both axles are more than 2 mm from the driving

wheels side. Tighten the adjusting nuts.

7. Reassemble the front skid plate and side skid plate to their original position.

(1) Adjustment nut

8. If the parking lever is rotated to the position shown in Fig. 4 and the parking shaft is still

in the parking state shown in Fig. 5, repeat the same steps above, but screw the lock

nuts adjust in the opposite direction.

6.7. Engine maintenance

See your engine manual for engine maintenance information. Your engine manual provides

detailed information and a maintenance schedule to perform the corresponding tasks. If in

doubt, consult your official Anova dealer.

123456789101112131415161718192021222324252627282930/ 30

Bekijk gratis de handleiding van Anova OR9500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd