Anova OR9500 handleiding

Handleiding

123456789101112131415161718192021222324252627282930/ 30

Afdrukken

Je bekijkt pagina 12 van 30

EN

12

Ignition switch (12V DC electric start) (optional)

The ignition switch is operated by a removable key that has 3 positions: STOP, RUN and

START.

Electric start and push button start (optional)

The engine will start correctly if the air is properly throttled by turning the key to the ON position

and pressing the button.

Warning

1. Swing operation requires the ball valve to operate at low speed. Use it only after

adjusting the throttle according to the actual load. Do not rotate when the ball valve is

in high speed.

2. To drive, it is necessary to stably control the valve lever. Avoid sudden stops or starts

of operation.

3. For normal driving start, it is necessary to stably control the valve lever to start when

the ball valve is in the low speed.

4. To stop at high speed, the ball valve must be switched to the low speed or small

acceleration state to stabilize the control valve lever and stop.

5. During normal driving, do not loosen one of the two levers of the ride control valve to

avoid malfunction when turning at high speed.

6. When getting on and off, the foot platform must be closed. Do not stand on the plate to

use the truck on a slope.

7. When the loading shovel falls backward, the valve levers must be controlled stably to

avoid a large impact between the shovel and the ground.

123456789101112131415161718192021222324252627282930/ 30

Bekijk gratis de handleiding van Anova OR9500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd